(1) 【Product introduction】
(2) CD1 type wire rope electric hoist is a kind of light small lifting equipment, it can installed in single beam crane, bridge, gantry cranes, cantilever crane etc. various cranes, with slight modification, it can do the hoist and CD1 electric hoist lifting speed to normal speed, can meet the requirements of the general situation of, so it is factories, mines, ports, warehouses, freight yard, shops and other one of the common heavy equipment, improve labor productivity, improve working conditions necessary for heavy machinery.
(3) 【Product features】
(4) Product volume is small, compact structure, variety and specifications, running smooth, simple operation, easy to use. In the same plane do straight, curved, loop overhead rail use can be can also be used in I-steel track electric single girder, manual single girder, bridge, suspension, cantilever, gantry crane. CD1 electric hoist is widely used in factories and warehouses, docks, power stations, logging field situations, hoisting goods handling, the ideal on heavy equipment.
(5) 【Using method】
(6) A new installation or after dismantling after the installation of the electric hoist, should first be empty test run several times. But before the installation is not installed, should not pass the test. In use, the absolute prohibition of under the environment does not allow and use more than the rated load and the hourly rated closing times (120). Installation, debugging and maintenance, must be strictly check the limit device is flexible and reliable, when the hook up first limit position, hook shell to the drum shell distance must greater than 50mm (10t 16t 20t must greater than 120 mm). When the hook to the lower limit position, should guarantee the safety of steel wire rope on the drum circle, effective safety ring must be 2 laps more than. Not allowed while pressing the two electric hoist movement in the opposite direction of the switch button.
(7) 【Note】
(8) 1, no electric hoist lifting unloading heavy side, prohibited use of overload.
2, in the use of the process, the operator should always check the wire rope is arbitrary deduction, knotting, drop tank, wear, if there should be ruled out in a timely manner, and to regularly inspect rope guide and limit switch position is safe and reliable.
3, after work, turn off the power switch, cut off the main power supply.